From: ROHLOFF GMBH [service@rohloff.de] Sent: Wednesday, March 27, 2002 3:21 AM To: Mark Newell Subject: Re: Fwd: We would like to distribute your drawings Hi Mark! That would be: OA02 OEM-Torque arm OA03 OEM-Dropout mounting dimension OA11 OEM-Dropout left OA13 OEM-Dropout left OA14 OEM-Dropout right OA17 OEM-Dropout DB left OA18 OEM-Dropout different types OA25 OEM-Dropout left disk brake OA26 OEM-Dropout frame part steel OA28 OEM-Dropout right rear drailleur OA31 OEM-Dropout frame part left/right OA36 OEM-Dropout AL frame part OA47 OEM2-Dropout left/right OA48 OEM-Dropout frame part right for side stand OA49 OEM-Dropout frame part right We just refer to the numbers so the descriptions are not too precise. Feel free to use them or find better ones if you like :-) I like "collected wisdom" pages. They supply new/good/different ideas or solutions so many things don't have to be done twice. Regards, Peter... Mark Newell wrote: >Many thanks, Peter, > >I made up names for your drawings (lame at best). So please if you have >time visit our page and give me the correct names. >http://www.ihpva.org/CADLibrary/index.html > >Mark Newell > > >-----Original Message----- >From: ROHLOFF GMBH [mailto:service@rohloff.de] >Sent: Friday, March 22, 2002 1:20 AM >To: mark-n@ak.net >Subject: Re: Fwd: We would like to distribute your drawings > > >Hi Marc, > >you are welcome to link to our website. >Enclosed you find the DXF-Versions of the drawings on our website. They >are packed with WINRAR, which is freeware. > >Peter Greb, Rohloff GmbH > >rohloff1@pacbell.net wrote: > >> >>---------------------------------------------------------------------- >>-- >> >>Original Message dated 3/19/2002, 10:36:03 PM >> >>Author: "Mark Newell" >> >>Re: We would like to distribute your drawings: >> >>---------------------------------------------------------------------- >>-- >> >> >> >>Dear Sirs, >> >>We would like to make available to our members your CAD Drawings, and >>would ask for your permission to link to you website. >> >>Would it be possible to get the drawings in a AutoCAD .dxf format? >>Thank you. >> > >>Webmaster, ihpva.org >>Mark Newell >> > > > __o > _`\<,_ > (*)/ (*) > -+-+-+-+-+-+- > > >>---------------------------------------------------------------------- >>- >> >-----------------------< > >> Rohloff Gesellschaft für antriebstechnische Entwicklungen mbH >> >< > >>---------------------------------------------------------------------- >>- >> >-----------------------< > >> contact: Rohloff GmbH phone: +49 561 875615 >> >< > >> Peter Greb fax: +49 561 875338 >> >< > >> Moenchebergstr. 30 http://www.rohloff.de >> >< > >> D-34125 Kassel >> >mailto:service@rohloff.de < > >>---------------------------------------------------------------------- >>- >>-----------------------< >> > > > -- Hallo vielen Dank für die e-mail. Viele Grüße / Best regards Carsten Geck Rohloff, Produktmanagement __o _`\<,_ (*)/ (*) -+-+-+-+-+-+- >----------------------------------------------------------------------------------------------< > Rohloff Gesellschaft für antriebstechnische Entwicklungen mbH < >----------------------------------------------------------------------------------------------< > contact: Rohloff GmbH phone: +49 561 875615 < > Carsten Geck fax: +49 561 875338 < > Moenchebergstr. 30 http://www.rohloff.de < > D-34125 Kassel mailto:service@rohloff.de < >----------------------------------------------------------------------- >-----------------------<